Description

GENERAL SPECIFICATIONS

What’s Included:
Raised toilet seat with removable handles, 2x 6.125” long screws (Flathead), 2x round plastic washers (1.18” outer diameter), 2x round metal washers (0.95” outer diameter), 2x butterfly nuts

Uses: Adds height to the toilet seat for stability and to reduce bending and twisting

Dimensions For Standard Seat:
Length (Front to Back): 17.25” (Inside: 11.25″)
Width (Left to Right): 13.89” (Inside: 10.25”)
Height: 3.5”
Thickness: 2”
Handle Width: 22”
Handle Length: 12.5”
Distance Between Handles: 19″

Dimensions For Elongated Seat:
Length (Front to Back): 19.25” (Inside: 13.25″)
Width (Left to Right): 13.75” (Inside: 10”)
Height: 3.5”
Thickness: 2”
Handle Width: 21.25”
Handle Length: 14.5”
Distance Between Handles: 19″

Materials: Composite, Aluminum, EVA foam

How To Attach Removable Handles:
Identify the right handle (“R”/blue arrow) and left handle (“L”/red arrow).
Press the brass pin and slide the arm into the seat with the pin facing out.
Ensure the pin clicks and emerges through the positioning hole.

How To Install:
Remove existing toilet seat and lid.
Center the riser on the rim, ensuring the bottom lip is inside the bowl.
Reattach the original seat and lid on top using the included hardware.
Thread screws through the holes (plastic washers on top, metal washers on bottom) and tighten with butterfly nuts.

Care Instructions: Wipe down seat riser and handles with a traditional disinfectant solution.